收藏本站
dsPIC33FJ16GP101/102 AND dsPIC33FJ16MC101/102
2.0
GUIDELINES FOR GETTING
2.2
Decoupling Capacitors
STARTED WITH 16-BIT
DIGITAL SIGNAL
CONTROLLERS
Note 1: This data sheet summarizes the features
of the dsPIC33FJ16GP101/102 and
dsPIC33FJ16MC101/102 family of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to the “dsPIC33F/PIC24H
Family Reference Manual” . Please see
the Microchip web site
( www.microchip.com ) for the latest
dsPIC33F/PIC24H Family Reference
Manual sections.
2: Some registers and associated bits
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization” in
this data sheet for device-specific register
and bit information.
The use of decoupling capacitors on every pair of
power supply pins, such as V DD , V SS , AV DD , and
AV SS is required.
Consider the following criteria when using decoupling
capacitors:
? Value and type of capacitor: Recommendation
of 0.1 μF (100 nF), 10V – 20V. This capacitor
should be a low-ESR and have resonance
frequency in the range of 20 MHz and higher. It is
recommended that ceramic capacitors be used.
? Placement on the printed circuit board: The
decoupling capacitors should be placed as close
to the pins as possible. It is recommended to
place the capacitors on the same side of the
board as the device. If space is constricted, the
capacitor can be placed on another layer on the
PCB using a via; however, ensure that the trace
length from the pin to the capacitor is within
one-quarter inch (6 mm) in length.
? Handling high frequency noise: If the board is
experiencing high frequency noise, upward of
tens of MHz, add a second ceramic-type capacitor
2.1
Basic Connection Requirements
in parallel to the above described decoupling
capacitor. The value of the second capacitor can
Getting started with the dsPIC33FJ16GP101/102 and
dsPIC33FJ16MC101/102 family of 16-bit Digital Signal
Controllers (DSCs) requires attention to a minimal set
of device pin connections before proceeding with
development. The following is a list of pin names, which
must always be connected:
? All V DD and V SS pins
(see Section 2.2 “Decoupling Capacitors” )
? All AV DD and AV SS pins, if present on the device
(regardless if ADC module is not used)
(see Section 2.2 “Decoupling Capacitors” )
? V CAP
(see Section 2.3 “CPU Logic Filter Capacitor
Connection (V CAP )” )
? MCLR pin
(see Section 2.4 “Master Clear (MCLR) Pin” )
? PGECx/PGEDx pins used for In-Circuit Serial
Programming? (ICSP?) and debugging purposes
(see Section 2.5 “ICSP Pins” )
? OSC1 and OSC2 pins when external oscillator
source is used
(see Section 2.6 “External Oscillator Pins” )
be in the range of 0.01 μF to 0.001 μF. Place this
second capacitor next to the primary decoupling
capacitor. In high-speed circuit designs, consider
implementing a decade pair of capacitances as
close to the power and ground pins as possible.
For example, 0.1 μF in parallel with 0.001 μF.
? Maximizing performance: On the board layout
from the power supply circuit, run the power and
return traces to the decoupling capacitors first,
and then to the device pins. This ensures that the
decoupling capacitors are first in the power chain.
Equally important is to keep the trace length
between the capacitor and the power pins to a
minimum thereby reducing PCB track inductance.
? 2011 Microchip Technology Inc.
Preliminary
DS70652C-page 21
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
MA9D00-42 DSUB CONN W/DIAGNOSTIC PORT STRT
MAI ADAPTER PUSH-ON/M-SWTCH ATTCHMNT
MAV0020RP VARISTOR ARRY 2ELEMENT 120V 0405
MAX11503EVKIT+ KIT EVAL FOR MAX11503
MAX11504EVKIT+ KIT EVAL FOR MAX11504
MAX11506EVKIT+ KIT EVAL FOR MAX11506
MAX13042EEVKIT+ KIT EVAL MAX13042E 4CH XLATOR
MAX13335EEVKIT# EVAL KIT
相关代理商/技术参数
MA330030 功能描述:子卡和OEM板 dsPIC33EP256GP506 PIM RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
MA330031 功能描述:子卡和OEM板 32Bit MCU 512KBFlash 128KB RAM, 80 MHz RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
MA330031-2 功能描述:子卡和OEM板 32Bit MCU 512KBFlash 128KB RAM, 80 MHz RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
MA330032 制造商:Microchip Technology Inc 功能描述:DSPIC33FJ32MC104 MOTOR CONTROL PIM - Boxed Product (Development Kits) 制造商:Microchip Technology Inc 功能描述:MOD PIM DSPIC33FJ32MC104 制造商:Microchip Technology Inc 功能描述:DSPIC33FJ32MC104, MOTOR CONTROL, PIM 制造商:Microchip Technology Inc 功能描述:dsPIC33FJ32MC104 Motor Ctrl 制造商:Microchip Technology Inc 功能描述:PLUG-IN-MODULE, DSPICDEM MOTOR CONTROL; Silicon Manufacturer:Microchip; Core Architecture:dsPIC; Core Sub-Architecture:dsPIC33; Silicon Core Number:dsPIC33F; Silicon Family Name:dsPIC33FJxxMCxxx
MA330033 制造商:Microchip Technology Inc 功能描述:DSPIC33EP512GM706 SINGLE MOTOR INTERNAL OP-1AMP PIM - Boxed Product (Development Kits) 制造商:Microchip Technology Inc 功能描述:MOD PIM DSPIC33EP512GM706 INT 制造商:Microchip Technology Inc 功能描述:dsPIC33EP512GM706 Single Motor Internal Op-Amp PIM 制造商:Microchip Technology Inc 功能描述:Single Motor Internal Op-Amp PIM w/ dsPIC33EP512GM706 制造商:Microchip Technology Inc 功能描述:dsPIC33EP512GM706 Single Motor Internal Op-Amp PIM, Plug-in Modules
MA330035 制造商:Microchip Technology Inc 功能描述:DSPIC33EP512GM710 GENERAL PURPOSE PIM - Boxed Product (Development Kits) 制造商:Microchip Technology Inc 功能描述:MOD PIM DSPIC33EP512GM710 GP 制造商:Microchip Technology Inc 功能描述:General Purpose Plug-In Module w/ dsPIC33EP512GM710 MCU 制造商:Microchip Technology Inc 功能描述:dsPIC33EP512GM710 General Purpose PIM 制造商:Microchip Technology Inc 功能描述:dsPIC33EP512GM710 General Purpose PIM, Plug-in Modules
MA3300-H 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:Silicon planar type
MA3300-L 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:Silicon planar type